•
There has been a huge increase in demand for smart watches in last couple years. There are many options in the market, yet there is no open source alternative, neither any initiative. I always loved open-source software & hardware thus i decided to turn my smart watch project into an initiative for creating a…
•
Hi fellows, Last week , my delivery – the arduino ethernet shield – from Farnell has arrived. I was totally excited about it but i didnt have much time to play with it last week because i had visa exams.Finally , yesterday i had some time to play with it. I tested some of…
•
English – Türkçe If you are unfamiliar with the project please check out the posts linked below : OBWIous – Opensource Bluetooth Watch Initiative Announcement Update on the OBWIous Hi my fellow readers , In this post , i wanted to share the story behind the bluetooth watch project and answer some questions like…
•
It has been more than month since Open Source Bluetooth Watch Initiative first announced.There has been some improvements.Hardware side of the project completed.But there is a lot to do on the software side to make it a nice developer-friendly watch.So i started programming an API for the watch.But this last month has been very…
•
Hello everyone, I’ve recently been dedicating my spare time to an exciting project: building a homemade Bluetooth wristwatch. This project, named OBWIous, leverages various components to create a versatile and functional device. Here’s an update on the progress: Project Overview For this project, I have utilized: Nokia 6610 LCD for the display Bluesmirf GOLD…
•
Here is the first step in making of Self Balancing Robot. In this step i worked on Bluetooth & Serial Communication. Communication scheme: N95 —(Bluetooth)—> PC —–( Serial)—-> Arduino I used the same motor driver shield which i already made back in Narduino Project. If you havent heard about Narduino Shield and its simple…
•
I just had an idea yesterday that can get me to make a self-balancing robot without buying any expensive electronic components. You know last summer i made a cellphone controlled RC Car which had a tabletpc onboard to get commands via bluetooth.That time , having an onboard tabletpc , save me from buying a…
•
Hi fellows, It’s been quite a while since these projects first appeared on Make:Blog but i didnt share those on my blog.So i decided to have them on my blog. 🙂 IR-Liqard : click here for the article Narduino : click here for the article
•
Hi everybody, Here is a photo of my homemade shields for arduino. Upper-Left:Narduino2.0 – L298 Motor Driver Shield Upper-Right: MIDI Controller with 3 LEDs for feedback Lower-Left:Narduino1.0 -Same Functionality with Narduino2.0 except Veroboard. Lower-Right: IR-Liqard – Data Monitoring Shield with IR receiver. visit my flickr page for closer photos. MIDI Controller Shield is the…